IP address An Internet Protocol ( IP) address conforming to the Ipv6 standard which is a numerical label assigned to devices participating in a computer network that uses the Internet Protocol. IP地址互联网协议(IP)地址遵循Ipv6标准,是分配给参与使用互联网协议的计算机网络的数字标签。
Sockets connect client-side software to server-side software using a combination of an Internet protocol ( IP) address or a Domain Name System ( DNS) address and port number. 套接字组合使用了一个Internet协议(IP)地址或一个域名系统(DNS)地址和端口号,将客户端软件连接到服务器端软件。
The Internet Protocol defines an IP address as a32-bit number. 互联网协议将IP地址定义为一个32位的编号。
This can be a URL, in the case of SOAP, or simply any address that a protocol can use to address the service. 这个位置可以是一个URL(对于SOAP来说),或者只是协议可以用来定位服务的地址。
Normally, applications call this routine to know the protocol, IP address and port number being used to cater for a particular RPC service. 通常,应用程序调用这个例程来了解特定RPC服务所用的协议、IP地址和端口号。
In part it's because your computer's unique Internet Protocol ( IP) address, assigned by your Internet provider, reveals your geographical whereabouts. 一部分是由于你电脑唯一的IP地址。这个地址注册在你的网络服务提供商之下,揭示了你的地理位置。
IP address: in full Internet Protocol address; Number that uniquely identifies each computer on the Internet. IP地址:全名网际网络协议地址,在网际网络上,辨识计算机主机的专属数字。
Only one usage of each socket address ( protocol/ network address/ port) is normally permitted. 通常每个套接字地址(协议/网络地址/端口)只允许使用一次。
Such embodiments may insulate the address switch 14, somewhat, from the protocol of the address phase of a transaction. 试译:这些实施方案可能使地址开关14略微与事项的地址周期协议互相隔离开。
If the lease time that remains on Dynamic Host Configuration Protocol ( DHCP) address assigned to offline server is exceeded, another client can obtain the IP address of the problem DC. 如果已超出为脱机服务器分配的动态主机配置协议(DHCP)地址上所剩的租用时间,另一个客户端即可获得问题DC的IP地址。
Link layer protocols mainly research on medium access protocol, MAC address, automatic link establishment technologies, protocol data structure and data transmission protocol. 链路层协议是短波自组织网技术的核心,其主要研究为信道接入协议、链路层地址标识、自动链路建立、协议帧格式及数据帧传输协议等。
I~ 2C bus is developed for interconnection between various chips in 1992.Compared with parallel interconnection, it has several advantages: only need two wires, uniform serial protocol for address and data. I2C总线是飞利浦公司在1992年推出的芯片间互连的双向串行总线标准,与传统的并行连接相比,他具有只需要2根连接线,使用统一的串行协议来实现寻址与数据传递。
This article has introduced its multicast protocol system, multicast address system, multicast network structure and multicast safety control and its application prospect. 文章介绍了IP组播的组播协议体系结构、组播地址机制、组播组网结构和组播安全控制及应用前景。
ARP Protocol points to the address mapping of Media Access Control. There is an error in ARP high-speed buffer storage. IP data package may be sent to wrong computer. ARP协议指向媒体访问控制的地址映射,ARP高速缓存中有一项不正确,IP数据报就可能被发往错误的计算机。
The IPv6 addressing management adopts the strategy of hierarchy routing. So it can support QoS routing protocol, resolve MAC address by neighbor discovery protocol, and add address stateless autoconfiguration to simplify network management. 而在IPv6地址管理方面则采用层次化路由选择策略,支持QoS路由协议,将地址解析通过邻居发现协议来实现,新增了无态地址的自动配置,使得网络地址的重新编号变得更加简单快速。
Base on the advantage of NP on flexibility, this paper puts forward an implement of 1000M load balance based on NP which achieve the goal of network protocol and ip address filter, network flow balance distribute. 根据NP在灵活性上的优势,本文提出了一个基于IXP2400网络处理器的G级负载均衡器的实现方案,实现了高效的协议、IP过滤和数据均衡分流。
Firstly, the author collected and analyzed the latest stuffs about IPv6 protocol and IPv6 transition at home and abroad, researched its new characteristics, then analyzed and compared three familiar transition methods, Dual Stack, Tunnel and IPv6/ IPv4 Protocol Translation& Address Translation. 本文首先收集并分析国内外关于IPv6协议及IPv6过渡问题的最新资料,研究IPv6新特性,对目前常用的三种过渡技术双协议栈、隧道和IPv6/IPv4协议与地址转换进行分析比较。
This paper discusses construct pattern, network topology, routing protocol, address planning, network management from the aspect of IPv6 network design. And then the design method is given. 本文对于IPv6网络的建设模式、网络结构、路由协议、服务质量、地址分配、网管等方面进行分析,提出IPv6网络的设计方法。
These concepts touch upon socket creating, transport layer port, protocol address, socket function call, etc. 这些概念涉及到套接口的建立机制、传输层端口号、协议地址、套接口系统调用函数调用等概念。
Secondly, discussed some key problems of the IM system including the protocol, the address resolution and the security. 其次,对即时消息系统中的几个比较核心的问题:通信协议,地址解析机制和安全问题进行了研究。
Every frame message of CAN 2.0 B protocol includes target address and source address, which can implement peer to peer information exchange without affecting other unit. 应用CAN2.0B协议可以使每一帧报文均包含目标地址和源地址信息,配合SJA1000芯片的接收双滤功能,可以实现点对点之间的信息交换。
The IPv6 protocol provides more address, so the study of testing on IPv6 protocol is very valuable. IPv6取代IPv4是必然的事情,对IPv6协议测试的研究和应用具有十分重要的理论和实用价值。
Simulation results show that the proposed routing protocol can effectively address the impact of bad nodes on the network, and has better dynamic adaptability. 仿真结果表明本文所提路由协议能够有效解决不良节点对网络的影响,具有较好的动态适应能力。
This paper makes full introduction for these three popular transition technologies: dual-stack, tunnels and IPv4/ IPv6 protocol to address translation, and then makes analysis and comparison with them. 本文详细说明了目前流行的双协议栈、隧道和IPv4/IPv6协议与地址转换三种过渡技术工作原理和机制,并对过渡技术进行比较分析。
The software design includes the CAN communication protocol and address coding for the nodal equipment of CAN bus. I identify the bus transfers priority of all kinds of information by analyzing the system, ensuring the reliable of the communication transceiver. 软件编制主要包括CAN通信协议的制定以及总线节点地址编码的确定,分析制定了总线传输中各类信息的优先级,以保证通信的可靠收发。
Compared with other Address auto-configuration protocols, this protocol assigns unique address to node rapidly without performing duplicate address detection. 与其他地址自动配置协议相比,本文提出的策略可以快速完成地址配置,不需要进行重复地址检测,开销很少。
In traditional Internet protocol, IP address not only represents the location of a network node in the internet, but also represents the identity. 在传统的互联网体系协议中,IP地址既代表网络节点的位置信息,又代表网络节点的身份信息。
NAT protocol, a network address translater, can temporarily relieve the shortage of ip addresses. NAT协议是网络地址转换协议,NAT协议可暂时缓解IP地址枯竭问题。
In the traditional Internet protocol architecture, IP address with identity and location dual semantics leads to dramatically drawback in the aspects of routing scal-ability, mobility and security. 传统互联网协议体系中的IP地址具有身份和位置双重语义,在路由可扩展性、移动性、安全性等方面产生了严重的弊端。
In the stage of packet matching, there are three matching steps, and they are protocol matching, address single-field matching and aggregation matching. 包匹配阶段分为三个步骤,协议匹配、地址的单域匹配和聚合匹配。